Description
The Fusion 3 took 1st and 3rd Place in Class 2 and;
1st, 2nd and 3rd in Class 3
at the British Nationals 2023 in it’s first year of competition!
After 2 Years of development the Fusion III has Landed!! This is the all new Fusion – although it may have a simular profile and design that flows through from it’s predicessors we have developed fundemental parts of the design. The wing has a wider cord, thinner section and wing fences -the thinner section allows for better gliding charateristics with a sight undercamber – the fences are removable, but provide protection to the tip. The fin is bigger and the rudder now runs below the tailplane, complimented with a split elevator, to provide more power. These changes with many more minor tweeks including an easier build (all formers now locate into the sides with tabs) we believe that we have taken the Fusion to the next level.
We are still a small British company, which allows us to focus on the small details to bring you a kit that is comprehensive and designed to achieve maximum performance. The Fusion III still retains the Fusion II’s stable platform, but with major tweeks the performance has been enhanced to provide you with a better all-round package. The kit is supplied with laser cut parts, strip and sheet wood, pre bent undercarriage and a comprehensive good quality hardware pack (metal clevises and closed loops systems, saddle clamps, horns etc). Only glue,covering and your choice of wheel are required to complete the finished airframe – Adding your choice of servos’s motor and ESC.
Download a copy of the instructions from here
Wingspan: 48″ – 1220mm
Motor Size: C3548 Brushless Outrunner – 900Kv (4s) or 1100Kv (3s)
For Esc Size: 60A (4s) or 80A (3s)
Engine Size – 32 – 46 cu in Glow
Weight RTF: 2.75 to 3.5lbs – 1133 to 1587g
Servos Required: Min 4 Standard servos – Such as Corona 238MG Micro Servos or Hitec HS-85MG
Functions: Elevator, Rudder, Aileron, Throttle (ESC)











